MPS Series Inverter

MPS Series Inverter Emergency Micro Power Systems

The MPS Series inverter system is designed to provide sinusoidal AC emergency power to connected incandescent, fluorescent, or LED fixtures between 20W and 55W. The system delivers clean sinusoidal AC output power and can be remotely mounted up to 1,000 feet away from the controlled fixture or fixtures. Unlike ballast fluorescent emergency packs, the MPS provides power to the input side of the fixture, including the ballast, which eliminates the possibility of incompatibility.

 

MPS models are available for surface, recessed, or ceiling T-Grid mounting and are designed for easy installation either on or near controlled fixtures. The systems support normally-on, normally-off, switched operation, or any combination thereof, and provide emergency power output for a minimum of 90 minutes.

MPS Series Inverter
Downloads
Specification Sheet
User Manuals
Installation Guide
MPS Series Server Dimensions

MOUNTING

    • Surface Mount: Surface mount models are designed for mounting to walls by means of keyhole slots provided in the back of the unit housing.
    • Recess Mount: Recess models provide recess mounting holes on both sides of the enclosure.
    • T-Grid Mount: Housing design allows simple drop-in installation be￾tween t-grid runs. Safety wires (supplied by others) are required for at￾tachment to building structure

 

ELECTRICAL SPECIFICATIONS

Input

  • Input Voltages: 120 or 277VAC ±10%
  • Input Frequencies: 60Hz ±2%
  • Input Protection: Provided by Service Panel, Rated 20A max.

Output

  • Output Voltages: 120 or 277VAC (60Hz)
  • Efficiency Rating: 98% at full rated load (line).
  • Waveform: Sinusoidal (digitally controlled, PWM design.
  • Static Voltage: ±5% during battery discharge. 0-100% linear load.
  • Output Frequencies: 60Hz. ±0.3Hz during emergency cycle.
  • Output Distortion: Less than 3% THD (linear load).
  • Transfer Time: Less than 1.0 second.
  • Load Power Factor Range: 0.44 Lead to 0.44 Lag.
  • Minimum Loading: 0% of rated system capacity.
  • Output Protection: Inverter fuse.

FEATURES

  • For powering incandescent, fluorescent, and LED fixtures.
  • True sinusoidal AC pulse width modulated (PWM) design provides clean 60Hz. emergency output.
  • Universal 120/277VAC, 60Hz. input/output.
  • Unit capacities up to 20W to 55W.
  • Soft Start” design reduces fixture inrush current.
  • Surface, recessed or T-Grid mount models.
  • Lumen output from fixture is 100% of nominal.
  • Unique design eliminates compatibility problems with LED drivers as well as fluorescent ballasts.
  • Normally-ON and/or Normally-OFF load output.
  • Provisions for local switching capability – Always-ON during emergency conditions regardless of local switch position.
  • Temperature compensated, dual-mode charger includes low voltage disconnect feature to provide protection against battery deep discharge.
  • Maintenance-free Lead-Calcium and premium grade Nickel￾Cadmium battery models offered.
  • Control panel with momentary test switch, AC-ON, Charge￾ON and Inverter-ON LED indicators.
  • Battery circuit fuse protected.
  • Reverse battery and AC lockout protection.

Related products

Scroll to Top